xiv Brocade DCX 8510-4 Backbone Hardware Reference Manual
53-1002177-06
• Appendix C, “Diagnostics and Troubleshooting,” provides methods for receiving system-wide or
component-level status, interpreting POST and boot activities and diagnostic tests; it also
includes troubleshooting tips.
• Appendix D, “Port Numbering Template,” contains templates where you can record the port
numbering sequence for the port blades.
Supported hardware and software
This document includes information specific to the Brocade DCX 8510-4 running Brocade Fabric
OS version 7.0.0. and later.
What’s new in this document
The following information has been added:
• Information was added to clarify the required Fabric OS for the application blades. See
“Brocade DCX 8510-4 blades.”
• Statement concerning flexibility of the chassis design was clarified. See “Brocade DCX 8510-4
features.”
• Chassis slot numbering was corrected, See “Chassis slots.”
Document conventions
This section describes text formatting conventions and important notices formats.
Text formatting
The narrative-text formatting conventions that are used in this document are as follows:
bold text Identifies command names
Identifies GUI elements
Identifies keywords and operands
Identifies text to enter at the GUI or CLI
italic text Provides emphasis
Identifies variables
Identifies paths and Internet addresses
Identifies document titles
code text Identifies CLI output
Identifies syntax examples
For readability, command names in the narrative portions of this guide are presented in mixed
lettercase: for example, switchShow. In actual examples, command lettercase is often all
lowercase. Otherwise, this manual specifically notes those cases in which a command is
case-sensitive.
To Next Page
Loading...
Need help?
General
