Brocade Communications Systems DCX 8510-4 User Manual

Brocade DCX 8510-4 Backbone Hardware Reference Manual xvii
53-1002177-06
Release notes are available on the MyBrocade website and are also bundled with the Fabric OS
firmware.
Other industry resources
For additional resource information, visit the Technical Committee T11 Web site. This Web site
provides interface standards for high-performance and mass storage applications for Fibre
Channel, storage management, and other applications:
http://www.t11.org
For information about the Fibre Channel industry, visit the Fibre Channel Industry Association Web
site:
http://www.fibrechannel.org
Getting technical help
Contact your Brocade DCX 8510-4 supplier for hardware, firmware, and software support, including
product repairs and part ordering. To expedite your call, have the following information available:
1. General information
• Technical Support contract number, if applicable
• Model name
• Operating system version
• Error numbers and messages received
• supportSave command output
• Detailed description of the problem and specific questions
• Description of any troubleshooting steps already performed and results
• Serial console and Telnet session logs
• syslog message logs
2. Brocade DCX 8510-4 serial number
The Brocade DCX 8510-4 serial number (Switch Serial No.) and corresponding bar code are
provided on the serial number label, as shown here:
The serial number label is located on the port side of the chassis, on the lower right side and
directly above the cable management comb.
In addition, the chassisShow command displays the Brocade DCX 8510-4 serial number, as
well as information about the port and application blades, and other field-replaceable units
(FRUs).
3. License ID
Use the licenseIdShow command to display the license ID.
*FT00X0054E9*
FT00X0054E9

Brocade Communications Systems DCX 8510-4 Specifications

General

Brand	Brocade Communications Systems
Model	DCX 8510-4
Category	Switch
Language	English