EasyManuals Logo

Brocade Communications Systems DCX 8510-4 User Manual

Brocade Communications Systems DCX 8510-4
164 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #133 background imageLoading...
Page #133 background image
Brocade DCX 8510-4 Backbone Hardware Reference Manual 113
53-1002177-06
Power specifications
A
The power requirements for a given configuration depend on which blades have been installed in
the chassis. Table 19 shows the power draw for the blades that can be used in the Brocade DCX
8510-4 chassis along with the power draw for the cooling fans.
All numbers for the blades assume that the blade is fully populated with optical transceivers,
including QSFPs for the core blades. All ports are Fibre Channel except where noted.
You can calculate your power requirements by combining the power draws for the various blades
and fan units in your configuration. While you may use fewer ports in a given blade, it is always
safer to use the power requirement of a fully populated blade.
Inrush current Limited to 60A peak for any initial current surge or spike of 10ms or less at
either cold or warm start. Any additional inrush current surges or spikes in
the form of AC cycles or multiple AC cycles greater than 10ms, and less than
150ms, must not exceed 15A peak.
Power supply output (each) Low line (85-132 VAC), 1000W; High line (180-264 VAC), 2000W.
TABLE 19 Power demands per component
Blade or fan
units
Maximum
Power Draw
(Watts)
Type of Blade Ports per blade Number of blades
permitted in chassis
Total ports per chassis
CP8 40 Control
blade
NA 2 NA
CR16-4 135 Core blade 8 64 Gbps QSFP
ports
216 quad ports (64
ports)
FC8-32E
(8Gb)
140 Port blade 32 8 Gbps SFP+ up to 4 128
FC8-48E
(8Gb)
160.4 Port blade 48 8 Gbps SFP+ up to 4 192
FC16-32
(16Gb)
140 Port blade 32 16 Gbps SFP+
-can use 8 Gbps
SFP+
up to 4 128
FC16-48
(16Gb)
160.4 Port blade 48 16 Gbps SFP+
-can use 8 Gbps
SFP+
up to 4 192
FC8-64 (8Gb) 126.4 Port blade 64 8Gbps SFP+ up to 4 256
FS8-18 235 Encryption
blade
16 8 Gbps SFP+ up to 4 64
FX8-24 250 Extension
blade
12 8 Gbps SFP+
10 1 Gbps Ethernet
2 10 Gbps Ethernet
up to 4 48 8 Gbps
40 1 Gbps Ethernet
8 10 Gbps Ethernet
Fan unit 90 NA NA 2 fans per chassis NA
TABLE 18 Power specifications (Continued)
Specification Value

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Brocade Communications Systems DCX 8510-4 and is the answer not in the manual?

Brocade Communications Systems DCX 8510-4 Specifications

General IconGeneral
BrandBrocade Communications Systems
ModelDCX 8510-4
CategorySwitch
LanguageEnglish

Related product manuals