Brocade Communications Systems NetIron MLXe Series User Manual

6. Once the chassis is securely inserted in the rack, fasten the mounting ears to the front rails of the rack using 10-32x.63 Phillips
Square cone screws. Refer to the following gure.
FIGURE 69 Secure chassis in rack
Your rack installation is complete.
Installing the rack mount kit on a 32-slot router in a four-post ush-mount EIA rack
You can mount the Brocade MLXe Series 32-slot routers in a four-post EIA rack using the optional four-post ush-mount
rack-mount kit RMK-4POST-MLXE-32.
NOTE
The RMK-4POST-MLXE-32 rack-mount kit cannot be used for installing the Brocade MLXe Series 32-slot routers
in an EIA rack with doors. For installing a Brocade MLXe Series-32 in an EIA rack with doors, use the RMK-CAB-
MLXE-32 rack mount kit which can be purchased from Brocade.
Installing a Brocade MLXe Series-32 router
Brocade NetIron MLXe Series Hardware Installation Guide
53-1004203-04 147

Brocade Communications Systems NetIron MLXe Series Specifications

General

Brand	Brocade Communications Systems
Model	NetIron MLXe Series
Category	Network Router
Language	English