Brocade Communications Systems NetIron MLXe Series - Page 16

TABLE 2 Interface modules used with Brocade MLXe Series routers (continued)
Part number Description Supported
device(s)
Introduced Supported Notes
EOL initiated.
Support
discontinued.
Copper SFPs are
supported at
1000Mbps only.
NI-
MLX-1GX20-
GC
20-port 10/100/1000 copper module with
IPv4/IPv6/MPLS hardware support.
MLX-4, MLX-8
MLX-16 and
MLX-32
NetIron R05.2.00. NetIron
R05.6.00.
EOL initiated.
Support
discontinued.
NI-
XMR-1Gx20-
GC
20-port 10/100/1000 copper module with
IPv4/IPv6/MPLS hardware support.
NetIron R05.2.00. NetIron
R05.6.00.
EOL initiated.
Support
discontinued.
BR-
MLX-1GCX24-
X
24-port 10/100/1000 Copper (RJ-45)
Module with IPv4/ IPv6/MPLS hardware
support. Supports 1M IPv4 routes in FIB.
MLXe-4,
MLXe-8,
MLXe-16 and
MLXe-32
Earlier than NetIron
R05.9.00.
Yes
BR-
MLX-1GCX24-
X-ML
24-port 10/100/1000 Copper (RJ-45)
Module with IPv4/ IPv6/MPLS hardware
support. Supports 512K IPv4 routes in FIB.
MLXe-4,
MLXe-8,
MLXe-16 and
MLXe-32
MLX-4, MLX-8
MLX-16 and
MLX-32
Earlier than NetIron
R05.4.00.
Yes License Upgradable
to "X" scalability (1M
IPv4 routes in FIB).
BR-
MLX-1GFX24-
X
24-port 1-GbE Fiber (SFP) Module with
IPv4/IPv6/MPLS hardware support. Supports
1M IPv4 routes in FIB.
MLXe-4,
MLXe-8,
MLXe-16 and
MLXe-32
Earlier than NetIron
R05.4.00.
Yes
BR-
MLX-1GFX24-
X-ML
24-port 1-GbE Fiber (SFP) Module with
IPv4/IPv6/MPLS hardware support. Supports
512K IPv4 routes in FIB.
MLXe-4,
MLXe-8,
MLXe-16 and
MLXe-32
MLX-4, MLX-8
MLX-16 and
MLX-32
Earlier than NetIron
R05.4.00.
Yes License Upgradable
to "X" scalability (1M
IPv4 routes in FIB).
BR-
MLX-10GX24-
DM
24-port 10-GbE Module with IPv4/IPv6/
MPLS hardware support. Bandwidth up to
200Gbps per module. Supports 256K IPv4
routes.
MLXe-4,
MLXe-8,
MLXe-16 and
MLXe-32
NetIron R05.4.00. Yes Requires SFP
optics.
NI-
MLX-1GX48-
T-A
48-port 10/100/1000Base-T, MRJ21
module with IPv4/IPv6/MPLS hardware
support.
MLXe-4,
MLXe-8,
MLXe-16 and
MLXe-32
MLX-4, MLX-8
MLX-16 and
MLX-32
Earlier than NetIron
R05.4.00.
Yes Requires high speed
fans NIBI-16-FAN-
EXH-A on MLX-16.
The following table describes all supported switch fabric modules for the Brocade MLXe Series routers.
Supported hardware and software
Brocade NetIron MLXe Series Hardware Installation Guide
16 53-1004203-04