Programmer
76
Chapter 2 Programming with Help Function
15. Turn the pulley with a hand and move the
needle to the top point.
16. Press
ESCESC
three times.
17. Select
with and press .
18. Select
with and press .
19. Move the work clamp with
. Press
when the needle point is at point D.
20. Press
ESCESC
.
3
Saving
1. Select with and press .
2. Select
with and press .
3. Input the data number and press
.
4. Press
ESCESC
.
4
Ending program
1. Press
P
.
To Next Page
Loading...
