Brother BM-2000

To Next Page

To Previous Page

4 PREPARING THE GLUE

BM-2000

6. The panel display will switch as showed below. Wait for a further 5 minutes or so.

7. The following screen appears and touch . Home position detection for the nozzle will be carried out.

8. The home screen will be displayed.

Main Page

Table of Contents2
Safety Instructions5
Notes on Safety5
Warning Labels7
Names of Major Parts9
Using the Operation Panel and Switches11
Name and Function of each Operation Panel Item11
Program Setting Method12
Parameter List13
Glue Thickness Setting Method14
Nozzle Clearance Setting Method15
Step Setting Method16
Upper and Lower Roller Feed Speed Setting18
Upper and Lower Cloth Glue-Free Width Setting19
Anti Stop Mark20
Comment Setting Method21
Using the Switches22
Nozzle Switch22
GLUE ON/OFF Switch22
Knee Switch and Op Hand Switch22
Feed Speed Adjustment Switch23
Sleep Mode23
Auto Sleep Mode23
Manual Sleep Mode25
Memory Switch26
Memory Switch Setting Method (for Operators)26
Memory Switch Setting Method (for Mechanics)26
Memory Switch Setting Method27
List of Memory Switch Settings (for Operators)28
List of Memory Switch Settings (for Mechanism)29
Nozzle Light Setting Method31
Preparing the Glue32
Starting the Machine34
Checking Glue Discharge36
Manual Discharge Mode36
Automatic Discharge Mode37
Gluing Pre-Condition Setting Method38
Setting Nozzle Glue Width39
Setting Roller Pressure39
Setting Edge Control Roller Pressure41
Setting Glue Thickness42
Setting Nozzle Space43
Setting Glue-Free Width44
Setting Upper and Lower Feed Speed45
Gluing47
Selecting Program no48
Gluing48
Gluing Stop Method55
Stopping the Machine55
Other Functions57
X-Over Bonding58
End Detection59
Replacing Glue Cartridge60
About Glue Level Indicator60
Glue Cartridge Replacing Method61
Cleaning65
Cleaning the Upper Roller, Lower Roller and Roller under Nozzle65
Cleaning the Nozzle Discharge Holes68
Cleaning the Cloth Plate72
Cleaning the Edge Control Roller74
Cleaning the Reflector77
Charging with Cleaner80
Part Replacement Method82
Replacing the Nozzle82
Nozzle Clearance Home Position Adjustment84
Adjusting the Nozzle Position (Feed Direction)85
Replacing the Lower Roller86
Standard Adjustments89
Changing the Gluing Width89
Replacing the Nozzle89
Settings When Changing the Gluing Width89
Adjusting the Anti-Entanglement Plates92
At Lower Roller Side92
At Upper Roller Side92
Adjusting the Upper Cloth and Lower Cloth Sensor Amplifiers94
Summary94
Setting the Light Intensity95
Adjusting the Positioning LED Marker97
Adjusting the Sideways Position of the Lower Edge Control Sensor99
Setting the Treadle Stroke101
Adjusting the Touch Panel Key Positions103
Protect Settings106
Setting Protection for each Function Individually107
Selecting All Items to Disallow Changing Them108
List of Functions that Can be Protected109
Installing the Flat Bed110
Software Upgrade114
Preparation114
List of Error Codes116

Brother BM-2000 - Page 35

Table of Contents

Related product manuals