10.5 Cleaning the reflector
When carrying out this operation, be sure to
wear protective goggles and protective
gloves
(*1)
. The nozzle becomes hot during use,
and burns could result.
Furthermore, if the glue comes into contact
with your eyes or skin, problems such as
burns, inflammation or allergic reactions could
result.
Avoid drinking, eating and smoking while
carrying out this operation.
If the glue is accidentally ingested, problems
such as respiratory difficulties or allergic
reactions could result.
If the power switch and air need to be left on
when carrying out some task, be extremely
careful to observe all safety precautions.
If you depress the treadle or the switches by
mistake, it will cause the machine to operate,
and injury may result.
Wash your hands thoroughly after carrying out
this operation.
(*1) Use protective gloves which can withstand temperatures of 200°C and higher.
To Next Page
Loading...
