10.6 Charging with cleaner
When cleaning the glue path, wear protective
gear such as protective goggles and protective
gloves
(*1)
to avoid exposure to your skin, and
avoid letting the glue and the cleaner come
into contact with your eyes and skin. If this is
not observed, problems such as burns,
inflammation or allergic reactions could result.
Do not drink or eat the glue or the cleaner. If
this is not observed, diarrhea or vomiting could
result.
Wear a disposable dust mask to avoid inhaling
the vapor from the glue and the cleaner. If this
is not observed, problems such as respiratory
difficulties or allergic reactions could result.
Keep the glue and cleaner out of the reach of
children.
Use in an area with adequate ventilation,
otherwise the vapors from the glue and the
cleaner may accumulate and problems such
as respiratory difficulties or allergic reactions
could result.
Avoid drinking, eating and smoking while
carrying out this operation.
If the glue or cleaner is accidentally ingested,
problems such as respiratory difficulties or
allergic reactions could result.
If the power switch and air need to be left on
when carrying out some task, be extremely
careful to observe all safety precautions.
If you depress the treadle or the hand switch by
mistake, it will cause the machine to operate,
and injury may result.
Wash your hands thoroughly after carrying out
this operation.
Use only genuine Brother glue cartridges.
Brother will not be held responsible for any
accidents or problems resulting from the use of
non-genuine parts.
Use only the cleaner specified by Brother.
Brother will not be held responsible for any
accidents or problems resulting from the use of
a cleaner which is not specified by Brother.
(*1) Use protective gloves which can withstand temperatures of 200°C and higher.
To Next Page
Loading...
