[Cleaning the upper cloth plate reflector]
1. Press the key to display the test screen.
2. Press the NOZZLE switch (1) to raise the nozzle (2) to
the highest position.
3. Use a soft cloth to wipe off any glue, dirt or other foreign
particles which are adhering to the reflectors (4) and (5)
on the underside of the upper cloth plate (3).
NOTE:
⚫ Do not wipe the reflector too firmly, otherwise it may
peel off.
⚫ Do not use any chemicals when wiping the reflector.
They may damage the reflector and cause the edge
control roller to stop working correctly.
To Next Page
Loading...
