* If the treadle is depressed at any time up to and including step 10, you can return to the status immediately
before that step.
For example, if you depress the treadle after carrying out the procedure in step 3, the cloth plate will lift.
* If a program which has multiple steps registered is selected, then while the treadle is being depressed in step
12, the steps can be switched by pressing the knee switch.
Push NOZZLE switch.
The nozzle will move to its lowest position.
After depressing the treadle, return it to its neutral
position.
The cloth plate drops and air is
blown.
Set the lower cloth.
After depressing the treadle, return it to its neutral
position.
The horizontal position for the lower cloth is
determined automatically.
After depressing the treadle, return it to its neutral
position.
The cloth plate lifts up and the lower cloth
is secured by the cloth presser.
To Next Page
Loading...
