Brother DCP-8065DN

ix Confidential
6.4.2 Procedures to Replace Periodical Replacement Parts ........................................ 6-4
6.4.2.1 Fuser unit and laser unit...............................................................................6-4
6.4.2.2 Paper feeding kit for tray 1, 2..................................................................... 6-32
6.4.2.3 Paper feeding kit for MP tray......................................................................6-39
CHAPTER 7 CLEANING
CHAPTER 8 MAINTENANCE MODE
8.1 ENTRY INTO THE MAINTENANCE MODE .............................................................8-1
8.2 LIST OF MAINTENANCE-MODE FUNCTIONS .......................................................8-2
8.3 USER-ACCESS TO THE MAINTENANCE MODE ...................................................8-3
8.4 DETAILED DESCRIPTION OF MAINTENANCE-MODE FUNCTIONS....................8-4
8.4.1 EEPROM Parameter Initialization (Function code 01/91) ....................................8-4
8.4.2 Printout of Scanning Compensation Data (Function code 05) ............................. 8-5
8.4.3 Placement of CCD Unit in Position for Transportation (Function code 06)..........8-9
8.4.4 ADF Performance Test (Function code 08) ......................................................... 8-9
8.4.5 Test Pattern 1 (Function code 09)......................................................................8-10
8.4.6 Firmware Switch Setting and Printout ................................................................8-11
8.4.6.1 Firmware switch setting (Function code 10) ..............................................8-11
8.4.6.2 Printout of firmware switch data (Function code 11)..................................8-13
8.4.7 Operation Check of LCD (Function code 12) .....................................................8-14
8.4.8 Operational Check of Control Panel PCB (Function code 13) ........................... 8-15
8.4.9 Sensor Operational Check (Function code 32) ..................................................8-16
8.4.10 Received Data Transfer Function (Function code 53)
(Not applicable to DCP-8060/8065DN.)............................................................. 8-18
8.4.11 Fine Adjustment of Scan Start/End Positions (Function code 54) .....................8-20
8.4.12 Acquisition of White Level Data and CCD Scanner Area Setting
(Function code 55) .............................................................................................8-22
8.4.13 Paper Feeding and Ejecting Test (Function code 67)........................................8-23
8.4.14 EEPROM Customizing (Function code 74) ........................................................8-23
8.4.15 Display of the Equipment’s Log Information (Function code 80)........................8-24
8.4.16 Machine Error Code Indication (Function code 82)............................................ 8-26
8.4.17 Output of Transmission Log to the Telephone Line (Function code 87)
(Not applicable to DCP-8060/8065DN.)............................................................. 8-26