Confidential
3-10
3.2.3 Paper Transfer
3.2.3.1 Paper supply
The feed roller picks up a few sheets or one sheet of paper from the paper tray every time it is
rotated and feeds it to the separation roller.
Fig. 3-11
The main motor drive is transmitted to the gears, and the gears are engaged. Then, the paper is
gripped between the separation roller and separation pad and separated into individual sheets.
The paper drawn out of the paper tray pushes against the regist front actuator, and the paper top
position or absence of paper is detected by the actuator movement. The tail edge actuator detects
the end of the paper fed.
When a paper jam occurs, the nips between the pressure roller and feed roller TR and between the
pinch roller and regist roller are released, which allows you to remove the jammed recording paper
easily.
Feed roller TR
Separation roller
Regist roller
Pinch roller
Feed roller
PE actuator
Pressure roller
Paper
Plate
To Next Page
Loading...
