Brother DCP-8065DN

Confidential
5-41
5.1.21 LF Roller 1 ASSY
(1) Release the Hooks of the Conductive bushing A to remove the Conductive bushing A.
(2) Remove the Retaining ring from the shaft of the LF roller 1 ASSY.
(3) Release the Lock lever and then remove the Bushing from the ADF chute ASSY, and
remove the LF roller 1 ASSY from the ADF chute ASSY.
Fig. 5-36

Assembling Notes
When assembling the LF roller 1 ASSY, assemble the Bushing with aligning the
Boss of the Bushing with the notch on the ADF chute ASSY.
Fig. 5-37
LF roller 1 ASSY
ADF chute ASSY
Conductive bushing A
Hooks
<Front side>
Bushing
ADF chute ASSY
Bushing
Boss
Lock leve
r
Retaining ring