Brother DCP-8065DN

Confidential
5-131
5.2.6 LT PCB ASSY
(1) Disconnect the connectors from the LT PCB ASSY.
(2) Remove the bind B M4x12 Taptite screw, and then remove the LT PCB ASSY.
Fig. 5-209
Hoo
k
Taptite, bind B M4x12
LT frame L
LT PCB ASSY
LT PCB ASSY
LT sensor harness
ASSY 1 connector
LT sensor PCB connecto
r
LT solenoid connecto
r
LT sensor harness
ASSY 2 connector
<Left side>