EasyManuals Logo

Brother MFC-8480DN Service Manual

Brother MFC-8480DN
652 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #115 background imageLoading...
Page #115 background image
3-24
Confidential
Error code 84
Paper jam in the back cover
Error code 85
Tray 1 is not installed into the machine
Error code 86
Tray 2 is not installed into the machine
Jam Rear
Open the Back Cover and remove the jammed paper, then press Start.
<User Check>
Check if the paper is jammed around the opened back cover. If jammed, remove it.
Step Cause Remedy
1
Harness connection failure of relay
rear PCB ASSY.
Check the harness connection of the relay
rear PCB ASSY and reconnect it.
2
Eject actuator catching on some
position
Correct catching of the eject actuator.
3
Paper eject sensor PCB failure Check the sensor performance following
the procedure described in “Maintenance
mode 32”. If any problem occurs, replace
the relay rear PCB ASSY.
4 Main PCB failure Replace the main PCB ASSY.
No Tray
A Tray is not detected, install Tray 1.
No Tray
A Tray is not detected, install Tray 2.
<User Check>
Check if the applicable tray is installed into the machine.
Check if the paper is jammed in the applicable tray.
Step Cause Remedy
1
T1 PE/edge sensor PCB/
T2 PE/edge sensor PCB failure
Check the sensor performance following
the procedure described in “Maintenance
mode 32”. If any problem occurs, replace
the T1 PE/edge sensor PCB failure/T2 PE/
edge sensor PCB.
2
Harness connection failure of
T1 PE/edge sensor PCB/
T2 PE/edge sensor PCB.
Check the harness connection of the T1
PE/edge sensor PCB/T2 PE/edge sensor
PCB. and reconnect it.
3 Main PCB failure Replace the main PCB ASSY.
4
Connector 55533-1219 failure
(only Tray 2)
Replace the connector 55533-1219.

Table of Contents

Other manuals for Brother MFC-8480DN

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Brother MFC-8480DN and is the answer not in the manual?

Brother MFC-8480DN Specifications

General IconGeneral
Print technologyLaser
Maximum resolution1200 x 1200 DPI
Economical printingYes
Print speed (black, normal quality, A4/US Letter)32 ppm
Grayscale levels256
Input color depth48 bit
Image formats supportedBMP, JPG, TIF
Maximum scan resolution19200 x 19200 DPI
Optical scanning resolution600 x 2400 DPI
Copier resize25 - 400 %
Maximum number of copies99 copies
Copy speed (black, normal quality, A4)32 cpm
FaxingMono faxing
Fax memory600 pages
Modem speed33.6 Kbit/s
Power supply typeAC
Weight (imperial)40.3 lbs
Dimensions (WxDxH)530.8 x 449.5 x 474.9 mm
Power requirements110 - 240V, 50/60 Hz
All-in-one functionsCopy, Fax, Scan
Standard media sizes2.75'' - 8.5\
Maximum internal memory0.576 GB
Color all-in-one functionsscan, n
Compatible operating systemsWindows OS Mac OS
Package dimensions (W x D x H)24.7 x 22.3 x 22.6 \
Total input capacity250 sheets
Total output capacity150 sheets
Auto document feeder (ADF) input capacity50 sheets
DisplayLCD
Market positioningBusiness
Internal memory64 MB
Sound pressure level (copying)56 dB
Sound pressure level (printing)30 dB
Maximum print size216 x 356 mm
Paper tray media typesBond paper, Envelopes, Plain paper, Recycled paper, Transparencies
Non-ISO print media sizesExecutive
ISO A-series sizes (A0...A9)A4, A5, A6
ISO B-series sizes (B0...B9)B5, B6
Maximum ISO A-series paper sizeA4
Supported network protocols (IPv4)ARP, RARP, BOOTP, DHCP, APIPA, LLMNR, LPR/LPD, IPP/IPPS, FTP, HTTP/HTTPS, SSL/TLS, TFTP, SMTP, APOP, POP, SMTP, SMTP-AUTH, SNMPv1/v2c/v3, ICMP, LLTD, CIFS, SNTP, NDP, RA, DNS, mDNS, ICMPv6
Standard interfacesUSB 2.0
USB 2.0 ports quantity1
Power consumption (standby)18 W
Power consumption (average operating)680 W
Package weight21645 g
Sustainability certificatesENERGY STAR
Maximum duty cycle30000 pages per month
Recommended duty cycle3500 pages per month
Operating temperature (T-T)10 - 32.2 °C
Operating relative humidity (H-H)20 - 80 %

Related product manuals