Brother ULT-2002D - BASIC EMBROIDERY PROCEDURES

Embroidery 5-3
1 —
2 —
3 —
4 —
5 —
6 —
7 —
8 —
?
!
9 —
CONTENTS
Index
Step # Action Page
1 Turn off the power. 1-12
2 Install sewing machine needle 75/11. 1-43
3 Attach embroidery foot “Q”. 5-4
4 Attach the embroidery unit. 5-5
5 Turn on the power. 1-12
6 Select an embroidery design. 5-8
7 Attach a stabilizer material to the fabric. 5-20
8 Place the fabric in the embroidery frame. 5-21
9 Place the bobbin, into bobbin case. 1-31
10 Attach the embroidery frame to embroidery unit. 5-24
11 Thread the machine. 1-32
12 Lower the presser foot and start embroidering. 5-30
Step 1, 5
Step 6
Step 11
Step 4Step 7, 8
Step 2, 3
Step 12
Step 10
Step 9
BASIC EMBROIDERY
Attach the presser foot, embroidery unit, and follow the other steps below to prepare the machine
for embroidery.