Brother ULT-2002D - The Thread Breaks During Sewing

5-36 Embroidery
1 —
2 —
3 —
4 —
5 —
6 —
7 —
8 —
?
!
9 —
CONTENTS
Index
The Thread Breaks During Sewing
1. Press the “Start/Stop” button to stop the machine.
2. Press the “Needle Position” button to raise the needle,
and raise the presser foot lever.
3. If the upper thread is broken, redo the upper thread-
ing. If the bobbin thread is broken, follow the direc-
tions on page 5-35 to reset the bobbin.
CAUTION
Be careful not to bump the embroidery unit carriage or
the presser foot when removing or attaching the em-
broidery frame. Otherwise, the pattern will not embroi-
der correctly.
4. Press .