Troubleshooting 9-15
1 —
2 —
3 —
4 —
5 —
6 —
7 —
8 —
?
!
9 —
CONTENTS
Index
47.
This message is dis-
played when the
machine is in twin
needle mode and a
pattern that can not be
sewn with the twin
needle is selected.
48.
This message is dis-
played when formatting
the floppy disk.
49.
This message is dis-
played when the bobbin
holder is at the right
(original) position, and
you try to press the
bobbin winder button.
■ Alarm Sounds
If the operation procedure was correct, the ma-
chine will beep once. If the operation proce-
dure was incorrect, the machine will beep twice
or four times.
Note
If you want to turn the alarm off, press .
See page 1-19 for more details.
To Next Page
Loading...
