Brother ULT-2002D - Page 37

1-26 Setting Up
1 —
2 —
3 —
4 —
5 —
6 —
7 —
8 —
?
!
9 —
CONTENTS
Index
22
1
1
2
3
1
▼
Note
When sewing with fine, cross-wound thread (see the il-
lustration at left), use the small spool cap, and leave a
small space between the cap and the thread spool (see the
illustration at left).
1 Spool cap (small)
2 Thread spool (cross-wound thread)
3 Space
5. Hold the thread from the spool in both hands, and pass
the thread behind the thread guide cover on top of the
machine.
Use both hands to set the thread around the thread
guide plate.
1 Thread guide plate
6. Pull the thread out as indicated on drawing.