Bruker DektakXT User Manual

Taking Measurements and Analyzing Data 4-17
Figure 4-21: Terms Removal (F-Operator) in the Data Analyzer Tree
2 Position the R and M cursors as far apart as possible along the baseline of the step.
3 Right-click and select Two-Point Linear Fit rom the Data Leveling Settings pop-up menu (see
Figure 4-22).
4 The profile trace re-plots and levels with the R and M cursor intercepts at zero.
Figure 4-22: Data Leveling Pop-up Menu

Bruker DektakXT Specifications

General

Brand	Bruker
Model	DektakXT
Category	Laboratory Equipment
Language	English