Buffalo LS-VL - Page 158

Chapter 4 Web Admin interface
LinkStation User Manual 157
Name Descriptions
Workgroup/Domain
Click [Modify Settings]
to change settings.
Authentication
Method
Select the method to join the network ([Workgroup], [NT
Domain], or [Active Directory]). [Workgroup] is the default.
Networking knowledge is required to congure other
methods. Consult your network administrator for details.
Workgroup Name Enter the [Workgroup Name] to have the LinkStation join a
Microsoft network group.
• Workgroup names may contain up to 23 bytes(UTF-8).
• Alphanumeric characters, multi-byte characters, hyphens,
underscores, and periods may be used.
• Do not use a symbol as the rst character of the workgroup
name.
WINS Server IP
Address
Enter the IP address of a WINS Server to use WINS Server.
NT Domain Name Enter [NT Domain Name] to use [NT Domain] as the method
to join the network.
• You can enter up to 23 bytes(UTF-8).
• Alphanumeric characters, multi-byte characters, -(hyphen),
_(underscore), and .(dot) may be used.
• Do not use a symbol as the rst character.
NT Domain
Controller Name
Enter [NT Domain Controller Name] to use [NT Domain] as a
method to join the network. Register the computer account
which has the same name as the LinkStation to the Domain
Controller.
• You can enter up to 63 bytes(UTF-8). Do not use multi-byte
characters.
• Alphanumeric characters, -(hyphen), and _(underscore) may
be used.
• Do not use a symbol as the rst character.
Active Directory
Domain Name
(NetBIOS Name)
Enter [Active Directory Domain Name (NetBIOS Name)] to use
[Active Directory] as a method to join the network.
• You can enter up to 23 bytes(UTF-8).
• Alphanumeric characters, multi-byte characters, -(hyphen),
_(underscore), and .(dot) may be used.
• Do not use a symbol as the rst character.