Buffalo LS-VL - Page 166

Chapter 4 Web Admin interface
LinkStation User Manual 165
Name Descriptions
Disks
Format Disk You may format disks in or connected to the LinkStation. All data
on the disk will be deleted if the drive is formatted. Back up any
important data before formatting a disk.
You cannot format a drive if you’ve scheduled a backup job. Also, do
not format the drive if it’s congured as the backup target of another
LinkStation.
The following tasks open a [Conrm Operation] screen.
• Delete Folder
• LinkStation's Restore Factory Defaults
• Erase Disk of the LinkStation
Enter the number shown in the [Conrmation Number] eld within 60
seconds, and click [Apply].
The LinkStation can format or recognize the following format types:
Format type Descriptions
EXT3
(USB hard
drive only)
EXT3 is recommended for external drives
attached to the LinkStation.
• You can perform both Read and Write.
• Supports Journaling File System.
• May take a while to format (a few minutes to
a hour).
• Less space is available than XFS after
formatted.
• More les in 1 folder, slower the access space.
Note: An EXT3 Reader is included in this
package for reading EXT3 disks from a
Windows PC.