Chapter1 Setup
LinkStation User Manual 23
5 USB 2.0 Connector
You may attach a USB device such as a digital camera, printer, memory card reader, or hard
drive. USB hubs, mice, keyboards, and all-in-one printers are not supported. USB card readers
that support multiple memory cards may not function properly.
6 ~ 9 Status LEDs 1 to 4
These display the status of the hard drive corresponding to the drive number.
Glowing green: Normal operation (ashes during access)
Glowing red: An error occurred in the hard drive. Replace the hard drive for the drive number
that is lit red.
10 Power Mode Switch
Switches between AUTO and MANUAL power modes (page 29).
11 LINK/ACT LED
Glowing green: Linked
Flashing green: Accessing
12 LAN Port
Connect to a router, hub, or switch on your Ethernet network.
13 Power Connector
Use the included AC cable to connect.
14 Fan
Do not block the fan.
15 Anti-Theft Security Slot
You can also secure it using an o-the-shelf wire lock.
To Next Page
Loading...
