Burkert ME43 - Page 54

54
Other setting options
Type ME43
BürkertCommunicator:Generalsettingscongurationarea
Detailedview Menu
Parameter büS
CongurationofthebüSinterface.
Displayedname Assign for display and Bürkert Communicator.
Location Specify location displayed for the device.
Description Enter description text for tooltips.
Advanced Uniquedevicename For partner allocation.
Specify Baudrate.
Specify CANopenaddress.
Busmode Setting büS interface mode.
Set ShowerrorsfrombüSpartners to indicate
whether or not and from which consumer the errors
are displayed.
Deallocationdelay Time from loss of a partner to
deletionofitsconguration.
Alarmlimits Set limits from which the device outputs a warning or error.
Supplyvoltage Set alarm limit for supply voltage.
Devicetemperature Set alarm limit for device temperature.
Warningbatteryvoltagelow Value is displayed.
Diagnostics Activate or deactivate diagnostic.
PDO
Conguration
Congureprocessdataobjects.
PDO 1
Resettodefaultvalues
Conguration
provider
StatusActivateordeactivatecongurationprovider
Removeallclientcongurations Set behaviour after device restart.
Forcerecongurationofallclients Set behaviour after device
restart.
Ignoreoineclients Activation or deactivation
Display Set display of device.
Brightness Set brightness of the display.
Contrast Set contrast of the display.
Mountingposition Set mounting position of the device.
Language Set language.
Screensaver Set Waittime.
Set Brightness.
Table 14: Setting options in Bürkert Communicator, General Settings conguration area – parameters detailed view
english