California Instruments MX30-1 - Figure 9-1: Application Menu

User Manual - Rev AJ California Instruments
5. Frequency Modulation test
Power Interrupt (Undervoltag ) test
.3.1.3.2 EMER NCY
AC Sou
1. imum
2.
3. Voltage unbalance
Source:
1. Emergency Voltage
9.3.1.3.3 ABNORMAL TEST
C So :
rm ol m u
A orm Volt e m imu
V ge op
4. Voltage Surge
Abnormal Voltage minimum
2. Abnormal Voltage maximum
3. Abnormal Voltage low
4. Voltage Drop
5. Voltage Surge
9.3.1.4 Front Panel Entry
6. Momentary Power Interrupt (Undervoltage) test
7. Voltage Surge (Overvoltage) test
8. Frequency Transients test(Group 1 only)
Frequency Variation test (Group 2 and 3 only)
DC Source:
1. Normal State Voltage test
2. Momentary e
3. Voltage Surge and Under
9 GE TEST
rce:
minEmergency Voltage and Frequency
Emergency Voltage and Frequency maximum
DC
A urce
1. Abno al V tage inim m
2. bn al ag ax m
3. olta Dr
5. Frequency Transients test (group 1 only)
DC Source:
1.
To perform a test from the keyboard, from the MENU 2 screen, select the APPLICATIONS
screen. The APPLICATIONS screen will appear as shown in Figure 9-1.
Figure 9-1: Application Menu
MX Series
192