California Instruments MX30-1 - Figure 4-10: HARMONICS;TRACE ANALYSIS Screen

User Manual – Rev AJ California Instruments
HARMON S Screen [3Pi controller only]
is dedicated to the advanced measurements available on the
ly. This screen is not available on the P controllers. The
urement screen is a true menu screen offering several user
re used to select the desired acquisition trigger and display
ed whenever the ENTER key is pressed while the cursor is
ICS/TRACE ANALYSI
The fourth measurement screen
MX Series with 3Pi controller on
Harmonics/Trace Analysis meas
accessible fields. These fields a
mode. The actual data is display on
the VIEW or START field. The following fields are available on this menu:
ARMONICS/TRACE ANALYSIS Screen
Description
Figure 4-10: H
Entry
FUNCTION Selects Voltage, Current or Both parameters for display.
Available display modes are TABLE, BAR and TRACE.
TABLE mode: Displays the first 50 harmonics in a
VIEW
tabular text format.
BAR mode: Displays the first 50 harmonics in a
graphical bar chart display.
a
cal
TRACE mode: Displays the selected Function in
time domain (waveform) graphi
display.
MX Series 89