User Manual – Rev AJ California Instruments
REPEAT This is the number of times the VOLTAGE SWEEP/STEP
vent will repeat before it will proceed to the next
event or exit the transient program. Note that the number of
times the transient event is generated is equal to the REPEAT +
1. Leave this value at zero if only one execution of this event in
the list is required.
EVENT # This must be the last item in the transient edit screen. All data
fields must be entered before ins rting the EVENT #. The
EVENT # takes a value from 1 to 99. The EVENT # defines the
ts in a multiple event
space them by 5.) Entry of a sequence EVENT # number will
reen.
transient e
e
order of execution of the transient even
transient. It is a good practice to enter spaced EVENT #’s to
allow insertion of an EVENT later if needed. (For example,
cause the display to return to the TRANSIENT sc
96 MX Series
To Next Page
Loading...
