8
: Custom Controls
438
For flash photography, pressing the button assigned to this function will
fire a preflash and record the required flash output (FE lock).
You can set the ISO speed by holding down <
0
> and turning the
<
6
> dial. If this control is used while ISO Auto is set, manual ISO
speed setting will take effect. If you use this function in the <
a
> mode,
you can adjust the exposure with the ISO speed while maintaining the
current shutter speed and aperture.
You can set the exposure compensation by holding down <
0
> and
turning the <
6
> dial. Useful when you want to set exposure
compensation in <
a
> manual exposure with ISO Auto set.
In manual exposure <
a
>, you can set the shutter speed with the
<
6
> or <
5
> dial.
In manual exposure <
a
>, you can set the aperture with the <
5
> or
<
6
> dial.
Press <
0
> to display the exposure compensation setting screen
(p.230) for the attached (built-in or external) flash unit on the LCD
monitor.
Press <
0
> to display the flash function setting screen (p.237) on the
LCD monitor.
d: FE lock
e: Set ISO speed (hold button, turnS)
f: Exposure compensation (hold button, turnS)
s: Shutter speed setting in M mode
f: Aperture setting in M mode
y: Flash exposure compensation
0/3: Flash function settings
To Next Page
Loading...
