Canon J1 - Feeding Unit

To Next Page

To Previous Page

2-5

Technology > Feeding Unit > Overview > Booklet Finisher

Feeding Unit

Overview

■

Staple Finisher

The nisher is designed to operate according to the commands from its host machine to

deliver arriving copies to trays in the appropriate mode: simple stacking, job offset, stapling.

There are three delivery methods.

Method of delivery

Normal

delivery

Simple stacking

Stack job offset

Staple

Front 1-point stapling

2-point stapling

Rear 1-point stapling

Normal delivery tray

F-2-5

■

Booklet Finisher

This product consists of the Finisher unit and the Saddle Stitcher unit.

The Finisher unit simply stacks sheets delivered from a host machine, offsets a stack job, or

staples and delivers the sheets to the trays according to commands delivered from a host

machine.

The Saddle Stitcher unit carries in, aligns, and stitches sheets delivered from the host

machine, and then feeds the resulting stack.

After these operations, it folds a stack of sheets and delivers it to the delivery trays of the

Saddle Stitcher unit.

There are four delivery methods.