How to remove impurities or water from Case 445/M2 Engine fuel lines?
If there are impurities or water in the fuel lines of your Case Engine, disconnect the hoses and clean them using a jet of compressed air. Dismantle and clean the injection pump. Remove water from the tank and refuel.
How to remove air from fuel and injection system in Case 445/M2?
If there is air in the fuel and injection system of your Case Engine, check that the hoses are not cracked or the unions loose. Replace worn parts, remove the air from the hoses and deaerate the injection pump and fuel filter by unscrewing the caps and working the primer pump by hand.
How to remove deposits or water from Case 445/M2 fuel tank?
If there are deposits or water in the fuel tank of your Case Engine, disconnect the hoses and clean them using a jet of compressed air. Dismantle and clean the injection pump. Remove water from the tank and refuel.
How to fix water pump drive belt slack in Case 445/M2?
If the water pump drive belt is slack in your Case Engine, check and adjust the tightness of the belt.
What to do if injection pump controls are broken in Case 445/M2 Engine?
If the injection pump controls are broken in your Case Engine, replace the faulty parts.
How to fix K.K.S.B. device out of calibration in Case 445/M2?
Details the engine identification code structure and meaning.
Describes the engine lubrication system and its components.
Explains the engine cooling system, its components, and layout.
Illustrates the engine's boost feeding system diagram.
Details the fuel feed system for engines with a mechanical rotary pump.
Explains the identification and function of the feed pump.
Describes the fuel filter's role in impurity and water separation.
Details the fuel feed system for engines with a mechanical pump unit.
Details the electrical components of the engine.
To Next Page
General