5. Device Customization
Although CashDro3 is pre-configured at the factory, it is recommended to review the
configuration points listed in this chapter. A correct installation implies configuring the
equipment according to the real needs of each client.
5.1 Users
We must define different user profiles that the client wants to have and we must configure
each user’s profile. We can modify by default users and/or create new users.
You can access at “Users” section from the Configuration menu of CashDro3 with the user
“admin” or “support”. Each user’s roles are explained bellow:
• User Admin: can create new users (non technical) and assign the rights that it has to
the other users.
• User Support: It can create new technical users and assign the rights that it has to
the other users.
Users management is done from the menu option “Configuration-Users” and it is explained in
12.1 Users section.
5.2 Documents printing
CashDro3 allows the configuration of a thermal printer that prints a receipt after the
execution of an operation. Two steps are required to configure receipt printing:
• Configure company data. These data will appear in the header of the receipts. Menu
option "Configuration-Company data", detailed in section 12.2 Company data.
• Configure the printer and the receipts to be printed. Menu option "Configuration-
Printing", detailed in section 12.3 Printing.
5.3 Bills denominations for recycling
By default CashDro3 recycles two bills denominations defined by the factory according to the
client currency and country.
If we want to modify this set up, we must go to the menu section “Configuration-
Currencies”, detailed in section 12.5 Currencies.
Important: In order to recycle bills of another denomination the corresponding pieces of the
recycler must be changed. Consult manual CD3 – Manual Bills recycler denominations
changing.
Device Customization | 12
To Next Page
Loading...