SETTINGS & TOOLS
NOTE
If the Bluetooth
®
power is switched off, the following
message will appear on the LCD screen: Turn
Bluetooth power on? Press the Center Select Key
c [OK] to select Yes. BLUETOOTH POWER ON will
appear on the display.
3. The handset will prompt you with the following
message on the LCD screen: PLACE DEVICE
YOU ARE CONNECTING TO IN
DISCOVERABLE MODE. Press the Center
Select Key c [OK].
4. The device will appear in the ADD NEW
DEVICE menu. Press the Directional Key j up
or down to select the device you wish to pair to,
then press the Center Select Key c [PAIR].
5. The handset will prompt you for the passkey.
Consult the Bluetooth
®
accessory instructions
for the appropriate passkey (typically “0000”—4
zeroes). Enter the passkey, then press the
Center Select Key c [OK].
NOTE
You do not need to input the passkey for pairing when
the passkey of the Bluetooth
®
Headset or hands-free
kit is 0000.
6. The handset will prompt you with the following
message on the LCD screen: [Device Name]
Before connecting:. If you would like to always
confirm before connecting to the Bluetooth
®
device, select Always Ask, then press the
151
To Next Page
Loading...
Need help?
General
