Cedar Summit F25720 - Page 23

Step 3: Rockwall Assembly
Part 2
9 x 1/4 x 1-1/4 Pan Bolt
 (1/4”lockwasher,3/16”atwasher&1/4”barrelnut)
9 x #8 x 1” Pan Screw
PB2
Hardware
Other Parts
9xRocks(green/yellow/burgundy)
S10
C: Alternating colours and shapes, attach 1 rock to each rock board using 1 (PB2) 1/4 x 1-1/4” Pan Bolt (with
lock washer, at washer and barrel nut) and 1 (S10) #8 x 1” Pan Screw per rock. (g. 3.2 and 3.3)
The Pan Screw is placed in the hole beneath the Pan Bolt. (g. 3.2 and 3.3)
Note: Make sure all hardware is used to secure each rock properly.
Fig. 3.2
3/16” Flat
Washer
1/4”
Barrel Nut
Fig. 3.3
S10
PB2
1/4” Lock
Washer
23 europecustomerservice@kidkraft.com