Cedar Summit F25720 - Attach Wall Tops

Step 8: Attach Wall Tops
A: In the opening of (050) SW Wall Panel, from the inside, attach (080) SW Wall Top, tight to the corner of the
panels with overhang facing in with 1 (S11) #8 x 2” Wood Screw at each end as shown in g. 8.1 and 8.2.
B: In the opening of (040) Slide End Panel, from the inside, attach (081) Half Wall Top, tight to the corner of the
panels with overhang facing in with 1 (S11) #8 x 2” Wood Screw at each end as shown in g. 8.1 and 8.2.
C: In the opening of (052) Wall Panel Back, from the inside, attach (082) Wall Top tight to the corner of the panel
with overhang facing in with 1 (S11) #8 x 2” Wood Screw at each end as shown in g. 8.1 and 8.3.
D: At the top of each slat, ush to the wall tops, attach 1 Corner Bracket using 3 (S37) #7 x 5/8” Pan Screws per
bracket. (g. 8.1 and 8.3)
Hardware
Fig. 8.1
Fig. 8.2
1 x SW Wall Top 5/4 x 3 x 33-1/2”
1 x Half Wall Top 5/4 x 3 x 33”
1 x Half Wall Top 5/4 x 3 x 39”
Wood Parts
080
4 x #8 x 2” Wood Screw
15 x #7 x 5/8” Pan Screw
S11
Inside View
Other Parts
5 x Corner Bracket
S37
081
082
Fig. 8.3
Inside View
B
D
C
B
D
C
B
D
C
040
052
Slat
Tight
081
080
082
050
S11
x 1 per end
per board
Corner
Bracket
Slat
S37
x 3 per
bracket
32 europecustomerservice@kidkraft.com