Cedar Summit F25720 - Rockwall Assembly

1 x Access Rock Bottom 1 x 6 x 22-1/8”
1 x Access Board 1 x 5 x 22-1/8”
4 x Board Rock A 1 x 6 x 22-1/8”
5 x Board Rock B 1 x 6 x 22-1/8”
Step 3: Rockwall Assembly
Part 1
Wood Parts
Hardware
030
033
032
031
A: Place (031) Access Board ush to the top of the Access Ladder/Rockwall Assembly and (030) Access Rock
Bottom at the bottom of the assembly as shown in g. 3.1. Then place (032) Board Rock A and (033) Board Rock
B as shown in g. 3.1. Do not screw boards down yet. Rock holes are to be staggered so they do not form a
straight line and are at the top of the boards. Note: Rock Boards are to be ush to (021) Right Access and
pilot holes are centred over (024) Rock Rail. (g. 3.1)
B: Make sure all boards are tight together and the assembly is square, then attach all boards except for (031)
Access Board using 4 (S20) #8 x 1-3/8” Wood Screws per board. (031) Access Board to be attached in Step 10,
Part 2, keep aside until needed. (g. 3.1)
40 x #8 x 1-3/8” Wood Screw
Fig. 3.1
IMPORTANT!
Follow hole
pattern
x 4 per
board
S20
S20
031
Do not attach yet,
put aside until
Step 10
030
032
033
033
033
033
033
032
032
032
020
021
024
Flush
22 europecustomerservice@kidkraft.com