28 Chadwick-Helmuth Company, Inc.
Chapter 3 - Getting Started
NOTE: First, make sure you installed the V2K Download Part No.
14129 software on your PC, following the instructions on the floppy
disk.
Download Vibrex 2000 or Vibrex 2000 Plus data, using the V2K
Download Software program, as follows:
1. Connect the Vibrex unit to your PC, using the 9-pin DBA female
connector to a 9-pin DBA female connector. This is called a straight-
through cable connection (see the diagram on page 27).
2. Run the V2K Download software in your PC.
3. Power up the Vibrex unit.
4. Click on the
OPEN NEW button in the V2K Download software.
5. Type in the name of the file you wish to contain the data, then click on
OPEN.
6. Click on
CAPTURE FROM V2K.
7. At the Vibrex unit, select the data to be stored from the Print or
Review menu.
8. Press
PRINT or START.
9. Downloaded data is displayed on screen. Data is now stored in the PC
for later use.
CAUTION: Attempting to download data without the V2K
Download Software program is cumbersome and may result in lost
data. Contact your Chadwick-Helmuth provider for ordering
information for this program, if you do not already have it.
For more details on how to download data to a PC, see the V2K
Download Software User Guide.
To Next Page
Loading...
Need help?
General
