Printing Data
Vibrex 2000 and Vibrex 2000 Plus User Guide 33
3.3.4.2 Printing With REVIEW and PRINT Keys
Using the REVIEW key, the user may review and select specific readings
or sessions for printing. The user may select any of the following printing
categories:
Prop Runs Select the propeller measurement, rear measurement,
or adjustment to be printed and press
PRINT. Select
<CURRENT RUN>
and press START or PRINT.
Spectrum Select the run to be printed and press
PRINT. Select
<CURRENT MEAS>
then press START or PRINT.
When the user selects a run to be printed by the
REVIEW
key, the user may choose the raw FFT data
for any individual spectrum.
Bal Measurement Select the measurement to be printed and press
PRINT. Select
<CURRENT MEAS>
then press
START or PRINT.
To Next Page
Loading...
Need help?
General
