Need help?Do you have a question about the Chadwick-Helmuth Vibrex 2000 and is the answer not in the manual?
General| Type | Vibration Analyzer |
|---|---|
| Display | Digital LCD |
| Output | Analog |
| Power Supply | 9V Battery |
| Operating Temperature | 0°C to 50°C (32°F to 122°F) |
Step-by-step guide for performing propeller balance operations.
Introduces the types of transducer inputs and general installation procedures.
Explains general installation procedures for the Vibrex systems.
Provides guidelines for correct placement and installation of velocimeters.
Describes the photocell system, its range, and basic setup.
Explains the initial steps for using the Vibrex 2000/2000 Plus, including powering up.
Explains how to use the PROPELLER BALANCE option for balancing operations.
Explains operations for helicopter rotor track-and-balance.
Explains how to use Spectrum Analysis to find vibration sources.
Details the procedure for collecting spectral data.
Details battery types, removal, and reinstallation for the Vibrex unit.
Recommends yearly function tests to ensure correct operation.
Outlines tests to ensure accurate measurement of sensor signals.
To Next Page