Vibrex 2000 and Vibrex 2000 Plus User Guide 35
Chapter 4
4.
Installation
This chapter gives basic information on equipment and other materials for
using the Vibrex 2000 and Vibrex 2000 Plus Digital Dynamic Balancer/
Analyzer systems, as well as general installation guidelines. Chapter 4
contains the following sections:
4.1 Installation: Introduction ........................................................35
4.2 Vibrex 2000 Basic Equipment..................................................36
4.4 General Installation ................................................................48
4.5 Sample Installations................................................................59
4.1 Installation: Introduction
The Vibrex 2000 and Vibrex 2000 Plus accept the following types of
transducer inputs:
• Velocimeter
•Photocell system
• Magnetic pickup
This chapter explains general installation procedures for using the
Vibrex 2000 or Vibrex 2000 Plus to collect data, using these transducers.
For more detailed instructions on transducer placement and data
collection, see the relevant equipment documentation and/or the
maintenance manual for the subject aircraft.
To Next Page
Loading...
Need help?
General
