Chadwick-Helmuth Vibrex 2000 - Page 88

76 Chadwick-Helmuth Company, Inc.
Chapter 5 - General Operation
Do a Vibrex 2000 Plus multiple-propeller balance operation, as follows:
1. From the Main Menu screen, select the
PROPELLER BALANCE
option. The first Balance Propeller Setup screen displays (see below).
2. Use the Edit Aircraft ID screen (see below) to enter the number of the
propeller (1 for engine No. 1 and so on) to be balanced, as well as the
additional information required.
3. Press START. The first Balance Propeller Setup screen displays
again, showing all the information the user just entered.
REAR ch<NONE>
PROP ch<1A>
if ok, push START
PROPELLER BAL SETUP
?
REAR ch<NONE>
PROP ch<1A>
if ok, push START
?
REAR ch<NONE>
PROP ch<1A>
if ok, push START
?
AIRCRAFT ID[ ]
ENG[ ]
SHOWS ENGINE
NUMBER
CURSOR LEFT
if ok, push START
= EDIT AIRCRAFT ID ==
CURSOR RIGHT
RESTORE/RESET FIELD
[ ] ENG-[ 1 ]
ENTER ENGINE
NUMBER