The Make Call page appears the first time that you use WebDialer (after you click the number that you want
to dial).
Step 2
(Optional) Make changes to your settings.
The Make Call page contains the following options:
•
Preferred language: Determines the language used for WebDialer settings and prompts.
•
Use preferred device: Identifies the Cisco Unified IP Phone (Calling device) and directory number
(Calling line) that you will use to place WebDialer calls. If you have one phone with a single line, the
appropriate phone and line are automatically selected. Otherwise, choose a phone and/or line. If you
have more than one phone, it will be specified by device type and MAC address. (To display the MAC
address on your phone, choose > Settings > Network Configuration > MAC address.)
If you have an Extension Mobility profile, you can select your Extension Mobility logged-in
device from the Calling device menu.
Note
•
Do not display call confirmation: If selected, prompts WebDialer to suppress the Make Call page. This
page appears by default after you click a phone number in a WebDialer-enabled online directory.
•
Disable Auto Close: If selected, the call window does not close automatically after fifteen seconds.
Cisco Unified IP Phone 7931G User Guide for Cisco Unified Communications Manager 9.0 (SCCP and SIP)
91
User Options Web Pages
Cisco WebDialer