Cisco 7931G - Directory Features; Corporate Directory; Dial from Corporate Directory While Not On Another Call

Turn On Mobile Connect from Mobile Phone
Procedure
Step 1
Dial your assigned Mobile Voice access number.
Step 2
Enter your mobile phone number (if requested) and PIN.
Step 3
Press 2 to enable Mobile Connect.
Step 4
Choose whether to turn Mobile Connect on for all configured phones or just one:
•
All phones: Enter 2.
•
One phone: Enter 1 and enter the number you want to add as a remote destination, followed by pound
(#).
Turn Off Mobile Connect from Mobile Phone
Procedure
Step 1
Dial your assigned Mobile Voice access number.
Step 2
Enter your mobile phone number (if requested) and PIN.
Step 3
Press 3 to disable Mobile Connect.
Step 4
Choose whether to turn Mobile Connect off for all configured phones or just one:
•
All phones: Enter 2.
•
One phone: Enter 1 and enter the number you want to remove as a remote destination, followed by
pound (#).
Turn On or Off Mobile Connect Access to All Remote Destinations from Desk Phone
Procedure
Step 1
Press Mobility to display the current remote destination status (Enabled or Disabled).
Step 2
Press Select to change the status.
Step 3
Press Exit.
Cisco Unified IP Phone 7931G User Guide for Cisco Unified Communications Manager 9.0 (SCCP and SIP)
53
Calling Features
Business Calls Using Single Phone Number