Cisco 7931G - Set Up Voice Message Service; Listen to Voice Messages or Access Voice Message System

Procedure
Press Volume while the handset is in the cradle. The new ringer volume is saved automatically.
Change How Voice Message Light on Handset Works
Procedure
Step 1
Log in to your User Options web pages.
Step 2
Choose Change the Message Waiting Lamp policy.
Step 3
Access your message indicator settings. Typically, the default system policy is to indicate a new voice message
by displaying a steady light on the handset light strip.
Change Audible Voice-Message Indicator
Procedure
Step 1
Log in to your User Options web pages.
Step 2
Access your message indicator settings.
Phone Screen Customization
You can adjust the characteristics of the phone screen.
Change Phone Screen Brightness
Procedure
Step 1
Choose ( ) > Settings > User Preferences > Brightness.
Step 2
To make adjustments, press Volume.
Step 3
Press Save, or press Cancel.
If you change the brightness setting on your phone, do not unplug the phone from its power source
for at least one minute, or the brightness setting will not get saved.
Note
Cisco Unified IP Phone 7931G User Guide for Cisco Unified Communications Manager 9.0 (SCCP and SIP)
60
Phone Customization
Change How Voice Message Light on Handset Works