Cisco 7931G User Manual

•
When you switch an in-progress call from your mobile phone to Cisco Unified devices that share the
same line (Session Handoff), the iDivert feature is disabled on the Cisco Unified devices. The iDivert
feature returns when the call ends.
•
If the call was sent to you directly (not transferred or forwarded to you), or if your phone does not support
the option described above, using iDivert redirects the call to your voice message system.
•
When you switch an in-progress call from your mobile phone to Cisco Unified devices that share the
same line (Session Handoff), the iDivert feature is disabled on the Cisco Unified devices. The iDivert
feature returns when the call ends.
Send Active, Ringing, or On-Hold Call to Voice Message System
Procedure
Step 1
Press iDivert.
If you have no redirect options available, the call transfers to your voice message system.
Step 2
If you have redirect options available, your phone displays a new menu. Choose an option to redirect the call.
Call Forward
You can use the call forwarding features to redirect incoming calls from your phone to another number.
Your system administrator may allow you to choose from two types of Call Forwarding features:
•
Unconditional call forwarding (Call Forward All): Applies to all calls that you receive.
•
Conditional call forwarding (Call Forward No Answer, Call Forward Busy, Call Forward No Coverage):
Applies to certain calls that you receive, according to conditions.
You can access Call Forward All on your phone or from your Cisco Unified Communications Manager User
Options web pages; conditional call forwarding features are accessible only from your User Options web
pages. Your system administrator determines which call forwarding features are available to you.
Tips
•
Enter the call forward target number exactly as you would dial it from your phone. For example, enter
an access code or the area code, if necessary.
•
You can forward your calls to a traditional analog phone or to another IP Phone, although your system
administrator may restrict the call forwarding feature to numbers within your company.
•
Call Forwarding is phone line specific. If a call reaches you on a line where call forwarding is not enabled,
the call rings as usual.
•
Your system administrator enables a call forward override feature that allows the person receiving your
forwarded calls to reach you. With override enabled, a call placed from the target phone to your phone
is not forwarded, but rings through.
Cisco Unified IP Phone 7931G User Guide for Cisco Unified Communications Manager 9.0 (SCCP and SIP)
29
Calling Features
Send Active, Ringing, or On-Hold Call to Voice Message System

Cisco 7931G Specifications

General

Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Wall mountable	Yes
Electromagnetic compatibility	FCC Part 15 (CFR 47) Class B, ICES-003 Class B, EN55022 Class B, CISPR22 Class B, AS/NZS CISPR 22 Class B, CISPR 24, VCCI Class B, EN55024, EN 50082-1, EN 61000-3-2, EN 61000-3-3, EN 61000-6-1
Wi-Fi	No
Networking standards	IEEE 802.1Q, IEEE 802.1af, IEEE 802.1p
Ethernet LAN interface type	Fast Ethernet
Supported network protocols	DHCP, TFTP, CDP
Lines quantity	24 lines
Phonebook capacity	- entries
Number of VoIP accounts	-
Voice codecs	G.711a, G.729A, G.729B, G.729ab
Volume control	Digital
Display resolution	192 x 64 pixels
Display number of lines	3 lines
Display number of colors	Monochrome
Storage temperature (T-T)	-10 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Safety	(UL) 60950, (CSA) C22.2 No. 60950, EN 60950, IEC 60950, AS/NZS60950, TS 001
Number of handles included	1 pc(s)

Weight and Dimensions

Depth	229 mm
Width	203 mm
Height	178 mm
Weight	1360 g