Cisco 7960 - Page 6

Contents
vi
Cisco IP Phone Administration Guide for Cisco CallManager 3.2, Cisco IP Phones 7960/7940/7910
78-10453-04
Additional Equipment 4-3
Safety Notices 4-3
Connecting the 7914 Expansion Module 4-4
Removing the Footstand from the Cisco IP Phone 7960 4-5
Connecting the Support Bar to the Cisco IP Phone 7960 4-6
Connecting the 7914 Expansion Module to the Support Bar 4-7
Connecting the RS 232 Cable 4-9
Connecting the Power Supply 4-11
Connecting the Footstand 4-12
Start Up Sequence 4-14
CHAPTER 5 Configuring Network Settings on the Cisco IP Phone 5-1
Accessing the Network Configuration Settings 5-2
Verifying Network Settings 5-3
Modifying DHCP Settings 5-9
Enabling DHCP 5-10
Disabling DHCP 5-11
Releasing a DHCP Address 5-12
Configuring IP Settings 5-14
Assigning an IP Address 5-14
Assigning Default Router 5-15
Assigning Subnet Mask 5-17
Assigning Domain Name 5-18
Assigning DNS Servers 5-19
Configuring VLAN Settings 5-20
Configuring TFTP Options 5-21
Assigning a TFTP Sever 5-21
Using an Alternate TFTP Server 5-23
Assigning a Backup TFTP Server 5-24