Cisco 8961 - Page 170

Configuration ReferenceDescriptionFeature
For more information, see the “External
Call Control” chapter in the Cisco Unified
Communications Manager Features and
Services Guide.
Allows Cisco Unified Communications Manager to
route audio and video calls to a route server that hosts
routing rules.
The route server receives routing requests from Cisco
Unified Communications Manager and in turn returns
routing directives to Cisco Unified Communications
Manager.
External Call Control
For more information, see Phone Button
Template for Personal Address Book or
Speed Dials, on page 174.
Allows a user to enter a Fast Dial code to place a call.
You can assign Fast Dial codes to phone numbers or to
Personal Address Book entries. (See “Services” in this
table.)
Fast Dial Service
For more information, see
Product-Specific Configuration, on page
165.
Federal Information Processing Standard (FIPS) 140-2
Level 1 provides a secure, encrypted environment that
meets the United States Department of Defence Unified
Capabilities Requirements (UCR) 2008 standard.
The default setting is Disable.
FIPS 140-2 Level 1
For more information, see Forced
Authorization Codes Setup, on page 187
and the “Route Pattern Configuration”
section of the Cisco Unified
Communications Manager
Administration Guide.
Requires a user to enter an authorization code to place
a call. Controls the types of calls that certain users can
place.
Forced Authorization Code
For more information, see Cisco Unified
Communications Manager Features and
Services Guide.
Provides the ability to record calls using Cisco Voice
Gateway. This allows you to record calls made on Cisco
Jabber, a Cisco IP Phone (SIP), or calls made on a
mobile device.
Gateway Recording For SIP
No configuration required.Allows a user to set the phone to use either a reduced
bass tone or the full bass tone. Reduced bass removes
low frequencies, which can improve muffled voices or
insufficient volume on handsets. The default setting is
for reduced bass.
Handset Bass Adjustment
Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager
10.0 (SIP)
146
Features, Templates, Services, and User Setup
Telephony features available for Cisco Unified IP Phone
REVIEW DRAFT - CISCO CONFIDENTIAL