Cisco 8961 - Page 349

APPENDIX F
Cisco Unified IP Phone Non-Lockable Wall
Mount
This appendix contains the information for installing the following products:
•
ADA Non-Lockable Wall Mount Kit for 8961 Series and 9900 Series IP Phones: Installed on the Cisco
Unified IP Phone 8961, 9951, and 9971.
•
ADA Non-Lockable Wall Mount Kit for 8961 Series and 9900 Series IP Phones plus a single Key
Expansion Module: Installed on the Cisco Unified IP Phone 8961, 9951, and 9971 with the Key
Expansion Module.
These nonlocking wall mount kits meet ADA 4.4.1 requirements.
•
ADA Non-Lockable Wall Mount Kit for 8961 Series and 9900 Series IP Phones, page 325
•
ADA Non-Lockable Wall Mount Kit for 8961 Series and 9900 Series IP Phones with Key Expansion
Module, page 334
ADA Non-Lockable Wall Mount Kit for 8961 Series and 9900
Series IP Phones
This section describes how to install the non-lockable wall mount kit on a Cisco Unified IP Phone 8961, 9951,
and 9971 when the phone is not connected to a Key Expansion Module.
Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager 10.0
(SIP)
325