Cisco ASR 1013 Hardware Installation Guide

Cisco ASR 1013Cisco ASR 1006Cisco ASR 1004Cisco ASR 1002,
1002-F, and
1002-X
2
Cisco ASR 1001Characteristic
•
Loaded
with AC
power
supply —
184 lb
(83.46 kg)
•
Loaded
with DC
power
supply —
190.6 lb
(86.45 kg)
•
Total
weight
with
superslots
— 202 lb
(91.62 kg)
with AC
and 208.60
lb (94.61
kg) with
DC
75 lb (34.019
kg) fully loaded
50 lb (22.679
kg) fully loaded
•
40 lb
(18.143
kg) for a
fully
loaded
Cisco
ASR 1002
Router or
Cisco
ASR
1002-F
Router
•
43.35 lb
(19.662
kg) for a
fully
loaded
Cisco
ASR
1002-X
Router
•
23.30 lb
(10.6 kg)
(with dual
AC power
and
integrated
daughter
card)
•
22.70 lb
(10.3 kg)
(with dual
DC power
and
integrated
daughter
card)
•
25 lb
(11.35 kg)
fully
loaded
Weight
2
Unless otherwise noted, the physical characteristics for the Cisco ASR 1002-F Router and Cisco ASR 1002-X Router remain the same as those for the Cisco
ASR 1002 Router.
The following list describes additional Cisco ASR 1000 Series chassis characteristics:
•
Cisco ASR 1001 Router:
◦
Chassis height meets EIA-310 rack spacing 1RU (1.71 in./43.43 mm), universal rack-mount
◦
Chassis width meets EIA-310 19-in. (17.3 in./439.42 mm) wide with rack brackets
◦
Cable-management brackets allow a bend radius of 1.5 in. (38.1 mm) for cables
◦
Ships with forward rack-mount brackets installed and an extra set included in the accessory kit
•
Cisco ASR 1002 Router and Cisco ASR 1002-X Router:
◦
Chassis height meets EIA-310 rack spacing 2RU (3.47 in./ 88.138 mm), universal rack-mount
◦
Chassis width meets EIA-310 19-in. (17.25 in./438.15 mm) wide with rack brackets
◦
Cable-management brackets at the Cisco ASR 1002 Router location can hold 16 ports of STP/UTP
RJ 45 cables
Cisco ASR 1000 Series Router Hardware Installation Guide
121
Preparing Your Site for Installation
Site Selection Guidelines

Cisco ASR 1013 Specifications

General

Brand	Cisco
Model	ASR 1013
Category	Network Router
Language	English