Cisco IE 3000 - Page 738

Index
IN-16
Cisco IE 3000 Switch Software Configuration Guide
OL-13018-01
Link Layer Discovery Protocol
See CDP
link redundancy
See Flex Links
links, unidirectional 25-1
link-state tracking
configuring 33-19
described 33-17
LLDP
configuring 23-3
characteristics 23-4
default configuration 23-3
disabling and enabling
globally 23-4
on an interface 23-5
monitoring and maintaining 23-7
overview 23-1
supported TLVs 23-2
switch stack considerations 23-2
transmission timer and holdtime, setting 23-4
LLDP-MED
configuring
procedures 23-3
TLVs 23-6
monitoring and maintaining 23-7
overview 23-1, 23-2
supported TLVs 23-2
LLDP Media Endpoint Discovery
See LLDP-MED
local SPAN 26-2
location TLV 23-3, 23-6
login authentication
with RADIUS 9-23
with TACACS+ 9-14
login banners 7-17
log messages
See system message logging
Long-Reach Ethernet (LRE) technology 1-13
loop guard
described 18-9
enabling 18-15
support for 1-6
LRE profiles, considerations in switch clusters 6-14
M
MAC/PHY configuration status TLV 23-2
MAC addresses
aging time 7-21
and VLAN association 7-20
building the address table 7-20
default configuration 7-20
discovering 7-26
displaying 7-26
dynamic
learning 7-20
removing 7-21
in ACLs 30-19
static
adding 7-24
allowing 7-25
characteristics of 7-23
dropping 7-25
removing 7-24
MAC address notification, support for 1-9
MAC address-table move update
configuration guidelines 19-8
configuring 19-12
default configuration 19-8
description 19-6
monitoring 19-14
MAC address-to-VLAN mapping 13-24
MAC authentication bypass 10-9
MAC extended access lists
applying to Layer 2 interfaces 30-21
configuring for QoS 32-41